Case study
RP2040 flashing-lights PCB
Firmware for a custom RP2040 / Raspberry Pi Pico PCB: buttons and lights, written in the Arduino IDE, with a virtual setup used to test them. Rated 5.0.
- Record
- Completed Upwork contract
- When
- 2 Nov 2024 to 1 Dec 2024
- Stack
- RP2040, Arduino, PCB
The Upwork title is “Flashing Lights PCB Coding for RP2040/Raspberry Pi Pico PCB Using Arduino IDE”. It ran from 2 Nov 2024 to 1 Dec 2024 and closed at 5.0.
The client’s review, as far as the profile shows it, says I coded their custom PCB, built a virtual setup for testing, and configured the buttons and lights. The review is cut off after that.
This is not the small public rpi-pico-btn-led repository. That repo is a separate Pico button and LED example. I am not linking it as this board.
“I worked with Roshan on coding my custom PCB, and his expertise was exceptional. He created a virtual setup for testing, configured buttons and lights with precise functionality, and developed...”